月度归档： 2025 年 7 月

Notice of the General Office of the Ministry of Industry and Information Technology on Further Optimizing the Work Procedure of Model Approval of Radio Transmitting Equipment

Beijing Economic and Information Technology Bureau, Shanghai Economic and Information Technology Commission, Fujian Provincial Department of Industry and Information Technology, Guangdong Provincial Department of Industry and Information Technology, Sichuan Provincial Department of Economy and Information Technology, National Radio Monitoring Center, and various radio transmitting equipment model approval and testing institutions:

In order to thoroughly study and implement the spirit of the 20th National Congress of the Communist Party of China, consolidate the educational achievements of the Supreme Leader’s Socialism with Chinese characteristics Thought in the new era, and implement the relevant requirements for the reform of the management system of the electronic and electrical appliance industry in the State Council, according to the People’s Republic of China (PRC) Administrative Licensing Law, the People’s Republic of China (PRC) Regulations on Radio Management and the Regulations on the Management of Radio Transmitting Equipment, we will further optimize the work procedure of radio transmitting equipment model approval (hereinafter referred to as model approval), shorten the relevant process time, and improve the licensing service quality. We hereby notify the relevant requirements as follows:

First, standardize the acceptance of audit, and make the first pass of model approval and licensing.

(1) Strict time limit for acceptance. The radio service acceptance center of the Ministry of Industry and Information Technology (hereinafter referred to as the acceptance center) shall accept the application materials for type approval in strict accordance with the radio management regulations. If the application materials are incomplete or do not conform to the statutory form, the applicant shall be informed of all the contents that need to be supplemented on the spot or within five working days. If the application materials are not informed within the time limit, it will be accepted as of the date of receipt of the application materials. The time limit for accepting the audit shall not exceed 5 working days. (The acceptance center is responsible)

(2) Improve the efficiency of undertaking. Improve the handling process of model approval tasks, and clarify and refine the audit basis, audit content and time limit requirements of each node. Reduce the processing time of the task contractor. During the acceptance review, the acceptance center will pre-generate the model to approve the task contractor according to the application materials, and then complete the production of the contractor within 2 working days after receiving the confirmation and uploading the test report. (The acceptance center is responsible)

(3) Improve the service interface. Improve the interface of the e-government service platform for model approval, and dynamically release the relevant policy requirements and approval results of model approval and licensing, so as to update the service items in time, make the approval process clear, standardize the approval requirements and facilitate the statistics of approval data. (The acceptance center is responsible)

Second, reduce the test time and complete the model approval test task with good quality and quantity.

(4) Reasonable assignment of tasks. Considering the factors such as the nearest service enterprises as a whole, combining the proportion of the number of service contracts purchased by the government of various model approval testing institutions (hereinafter referred to as testing institutions) and the amount of tasks to be tested, scientifically and reasonably allocate the model approval testing tasks, reduce the waiting time for the applicant to test, and improve the execution efficiency and use efficiency of the model approval testing funds. (The acceptance center is responsible)

(5) Submit samples in time. After the application for model approval is accepted, the acceptance center will notify the applicant to provide test samples and inform the relevant requirements at the first time through websites, text messages and other forms. Relevant samples should be prepared by the applicant in advance and ensure that they have the test conditions. After receiving the acceptance notice, the applicant shall provide the test samples (including the logistics time of sample delivery) for no more than 15 working days. If it takes more than 15 working days, the applicant shall bear the consequences of the delay, and the testing institution may give priority to other model approval testing tasks that submit samples on time. If it is inconvenient to mail the test samples due to reasons such as excessive quality or volume, the applicant shall negotiate with the testing institution for on-site testing. (Acceptance center and testing organization are responsible)

(6) Accelerate the debugging progress. After receiving the test sample, the testing institution shall conduct debugging within 10 working days. If it takes more than 10 working days, the testing institution shall submit a written explanation to the acceptance center and make rectification, and the acceptance center will adjust the model approval test business allocated to the testing institution accordingly. If the test sample is not debugged successfully due to the applicant’s own reasons, the testing institution may give priority to other successfully debugged samples. (Acceptance center and testing organization are responsible)

(7) Strict technical testing. After the testing organization completes the debugging, it shall complete the technical test of type approval and submit the test report within 10 working days. For the unqualified samples, the unqualified report shall be issued, and the testing institution shall not repeat the test. If the sample test is overtime, the testing institution shall issue a written explanation and make rectification. If the testing organization still exceeds the testing time limit after rectification, the model approval testing business allocated to the testing organization will be adjusted later. (Acceptance center and testing organization are responsible)

(eight) timely feedback report. To undertake the task of model approval and testing, the provincial radio management organization (hereinafter referred to as the relevant provincial radio management organization) shall confirm the test report of the testing organization and feed it back to the acceptance center in strict accordance with the relevant provisions of radio management and the relevant requirements of the government purchase service contract. The time to confirm the report (including the time to release the test task) shall not exceed 3 working days. (Responsible for relevant provincial radio management institutions)

Third, improve the quality of service and improve the satisfaction of the public service platform

(9) Improve service quality. Strengthen the training of accepting personnel and improve job skills. Relevant personnel should be familiar with the management policies and regulations of radio transmitting equipment, the national standards on which the model approval is based and the relevant provisions of the national radio management, and be able to reply to the consultation telephone in a timely, accurate and patient manner. Improve the public service telephone service function and service quality of the acceptance center. In case of business system upgrade and adjustment, the applicant should be informed in advance and the contact number should be provided. (The acceptance center is responsible)

(10) Strengthen statistical analysis. The acceptance center forms a quarterly model approval business briefing and reports it to the Radio Administration Bureau of the Ministry of Industry and Information Technology. The key point is to make statistics and analysis on the acceptance of model approval (number of applications, acceptance number, acceptance time, approval time, etc.), the testing situation of testing institutions (test task allocation, debugging time, testing time, etc.) and the telephone calls received by users (answering volume, answering rate, user satisfaction, feedback, etc.), and put forward opinions and suggestions in time. (The acceptance center is responsible)

Fourth, strengthen supervision and inspection to ensure that the policy of benefiting enterprises is implemented.

(eleven) to strengthen internal management. Acceptance center, relevant provincial radio management institutions and testing institutions shall further improve the rules and regulations, strengthen the management of personnel, funds, certificates, seals, documents and samples, clarify post responsibilities, standardize operating procedures, keep business secrets, and smooth the feedback channels of enterprise opinions and suggestions. (All relevant units are responsible according to the division of responsibilities)

(12) Increase input. The acceptance of model approval business continues to be entrusted to the National Radio Monitoring Center (hereinafter referred to as the Monitoring Center). The monitoring center shall, according to the "three decisions" of the acceptance center, incorporate the relevant work of the acceptance center into the annual key work of the center, increase investment, and strengthen the guidance, supervision and assessment of the acceptance center. (The monitoring center is responsible)

(thirteen) to strengthen supervision and inspection. The Radio Management Bureau of the Ministry of Industry and Information Technology should strengthen supervision and inspection, and regularly carry out work evaluation of the acceptance center as an important part of the evaluation and monitoring center’s support to the Ministry; Entrust professional institutions to supervise and inspect the use of funds and business development of testing institutions, and the results will serve as an important reference for testing institutions to undertake model approval testing services purchased by the government. (All relevant units are responsible according to the division of responsibilities)

(fourteen) to prevent the risk of clean government. The staff of relevant provincial radio management institutions, monitoring centers, acceptance centers, testing institutions and other units should strictly implement the spirit of the eight central regulations. Strengthen clean government education, raise risk awareness, strictly abide by the bottom line of discipline, take the initiative to accept the supervision of the masses, and ensure that the whole process of model approval administrative license is fair, open and just. (All relevant units are responsible according to the division of responsibilities).

This notice shall come into force as of January 1, 2024.

General Office of Ministry of Industry and Information Technology

November 13th, 2023

Netease YEATION with 10 billion to find outstanding China manufacturers to boost foreign trade enterprises to domestic sales.

The second phase of the 121st Canton Fair opened in Guangzhou yesterday. Unlike in previous years, when exhibitors competed for foreign orders in the exhibition hall, a team holding the banner of "Before relying on foreigners, now relying on Netease YEATION-10 billion procurement funds waiting for you" was particularly eye-catching yesterday.

"I have generally only seen exhibitors advertise to grab orders, but buyers have never seen anything that attracts exhibitors’ attention." A domestic buyer who has participated in the Canton Fair for five consecutive years said so.

At present, China’s foreign trade shows obvious signs of stabilization, but many foreign trade enterprises are still struggling to cope with uncertainties such as rising cost factors. As a representative of domestic ODM e-commerce, Netease YEATION made a high-profile "anti-grab" China manufacturers at the Canton Fair. On the one hand, Netease YEATION, which focuses on quality products, explored its own needs for high-quality supplier resources; On the other hand, with the obvious trend of domestic consumption upgrading, foreign trade enterprises that had advantages in production quality have a better market opportunity to explore the domestic market.

Foreign trade is picking upBut enterprisesStill havenip/chill in the air

According to the data released by the General Administration of Customs on April 13th, in the first quarter of 2017, China’s import and export of goods reached 6.2 trillion yuan, up 21.8% year-on-year. This is the year-on-year growth of China’s total import and export value for three consecutive quarters since the second half of last year.

However, Lu Wenbo, general manager of Guangzhou Puxin International Trade Co., Ltd., an exhibitor of Canton Fair, is still unhappy. Lu Wenbo’s company is mainly engaged in exporting refrigerators and air-conditioning compressors. Last year, with the depreciation of RMB and the recovery of emerging market countries in the United States and Southeast Asia, the company’s turnover increased to a certain extent, but its profits were compressed. "But because the price of steel doubled last year, and packaging materials such as plastics also rose sharply, the production cost rose, and we had to give up some profit margins to maintain our competitiveness."

Xu Bing, spokesman of Canton Fair and deputy director of China Foreign Trade Center, also reminded that since the beginning of this year, China’s foreign trade has continued the good momentum of stabilization and improvement since last year, and new development momentum is accumulating. However, the current world economic recovery is weak, the market demand has not been fundamentally improved, and "anti-globalization" has obviously risen. China’s domestic comprehensive factor costs are rising, and the traditional advantages of foreign trade are weakening. The foreign trade situation is still complicated and grim, and it still needs hard work to consolidate the stable and good momentum of foreign trade.

According to the report "Trade Statistics and Outlook" released by the World Trade Organization (WTO), the growth rate of global trade is expected to expand to 2.4% this year, and the uncertainty of major economies’ policies will curb trade activities. Higher inflation rate will lead to higher interest rates, and tighter fiscal policies and trade barriers will slow down trade growth in the next two years.

Exit turnOpportunities for domestic sales opportunities

When the reporter visited the museum, he learned that in order to share the potential risks brought by foreign trade uncertainties, some foreign trade enterprises not only choose emerging markets, but also actively promote the domestic market with great potential.

In fact, it is nothing new to talk about "exporting to domestic sales" at the Canton Fair. As early as 2009, when experiencing the global economic crisis, opening up the domestic market was an important topic for foreign trade enterprises. In that year, the Canton Fair even set up a domestic procurement center for the first time to invite domestic buyers to help foreign trade enterprises "save the market".

Exhibitor Yang Chongyi’s company is mainly engaged in the production of thermos cups for export. In addition to OEM for overseas brands, the company has launched its own brand since 2003, and the sales channels are very mature. Except for the layout of physical supermarkets, Tmall and JD.COM have opened flagship stores, but what makes Yang Chongyi a little helpless is that products with almost the same materials and quality can hardly sell at a good price as long as they are China brands and China designs.

Some exhibitors believe that with the general trend of domestic consumption upgrading, the ranks of the middle class are getting bigger. This group demands itself with high standards, and consumption preferences are beginning to be related to quality of life, emotional factors, personalization and sense of design. It is more appropriate to talk about "export to domestic sales" now.

"It can be said that the manufacturers at the Canton Fair have been doing OEM work for foreign countries, so their production capacity is very strong. Many of them have their own R&D centers and are very familiar with the needs of consumers in China. The Canton Fair has gathered the top domestic manufacturers. " Some domestic buyers said that although the foreign trade situation has stabilized, after this wave of economic crisis, many foreign trade factories have realized that they can’t rely solely on foreign markets. In addition, after the domestic consumption upgrade, Chinese people are more willing to pay for the quality of goods, and the "export goods" with high quality and price can also have a market in China.

Yang Feng Jianmin, an exhibitor, is the deputy general manager of a scissors manufacturing enterprise in Yangjiang. In the past, this enterprise was 100% an export order and contracted for a German brand. Two years ago, Feng Jianmin and his company participated in the Canton Fair, with the intention of expanding more overseas business. Surprisingly, it opened up domestic sales channels by mistake.

"At the Spring Fair last year, the head of Netease YEATION visited the Canton Fair to find high-quality domestic suppliers, and just came to our booth. After learning that we were OEM scissors for a famous German brand, we hit it off and started cooperation. Before that, we never took orders for domestic sales."

At present, the company has launched two scissors products in Netease YEATION, with the price ranging from 10 yuan to 20 yuan. With the same technology and materials, the price of scissors products manufactured by the company for German brands has reached more than RMB in 200 yuan. With high cost performance, the sales of two scissors products are very hot, and the current sales volume has reached more than 30,000.

Netease YEATION Supply Chain Strategyleave first

However, the reporter also learned at the Canton Fair that although the prospect of "domestic consumption upgrading" is bright, some foreign trade-oriented enterprises with relatively weak capital can only try hard to meet the domestic market because of the different transaction methods, trading rules and settlement methods between domestic trade and foreign trade.

According to industry insiders who have been engaged in foreign trade for many years, the transaction process of foreign trade-oriented enterprises in the past was very simple. After receiving the order-proofing and confirming to the customer-auxiliary materials for production-production of bulk goods-inspection and shipment-payment was received. However, in the domestic market, when the brand cooperates with the supplier, it adopts the "361" payment method, that is, it is paid in stages according to 30% advance payment, 60% withdrawal payment and 10% quality guarantee. When the brand pays the remaining 10% of the mortgage, it will not only pay interest, but also often deduct the factory money, which will make the enterprises interested in domestic sales bear huge financial pressure risks.

In this regard, the relevant person in charge of Netease YEATION introduced that Netease YEATION has a special fund to pay the interest on withholding money to all cooperative suppliers, thus forming a benign cooperative relationship with suppliers and changing their long-term passive position. According to the industry practice, 10% of the payment will be paid as the quality guarantee, and Netease YEATION will pay the interest of this deposit to the supplier according to the bank interest rate.

It is reported that in addition to the above preferential interest policy, in order to ensure the stability of cooperation, CEO Ding Lei also said at the first supplier conference of Netease YEATION last year that in terms of orders, every cooperation between YEATION and suppliers will last at least 3 to 5 years, which is equivalent to giving suppliers a reassurance.

For the exhibitors in the Canton Fair, Netease YEATION, a model of direct supply of ODM products by suppliers, is a new attempt for them.

"The market competition for OEM of foreign big brands is becoming more and more fierce, and brands are pushing down prices too hard; The gross profit margin of supplying to YEATION is generally slightly higher than the traditional OEM model. " Ye Guoan’s handbag manufacturing co., Ltd. has been with Netease YEATION for one year. He said that although most of the company’s sales still come from the traditional OEM mode, he has decided to increase the scale of cooperation with YEATION, recommend several self-developed products to YEATION for shelf screening every quarter, and split the large workshop that was previously produced to match large orders into several small workshops to adapt to the rhythm of e-commerce and respond quickly. He feels that his identity has changed from a simple OEM to a strategic partner of YEATION, and his independent space has become larger.

"Maybe now is the best opportunity to bring foreign trade goods back to China and open up the domestic market." Ye Guoan said so.